This article will describe installing conky which is a system monitor tool running as desktop widget.
Table of Contents
1 Install conky
Install conky package.
$ sudo pacman -Sy --noconfirm conky
2 ${HOME}/.conkyrc
${HOME}/.conkyrc is config file for conky.config and conky.text. You can also use /etc/conky/conky.conf.
- CPU core number is started from 1 (cpu0 means average of cores). Add entry of ${cpu cpuN} for your cpu cores.
- The following command treats ens3 as network interface name. Change your network interface name of ifconfig.
2.1 Always foreground .conkyrc
$ export NETWORK_INTERFACE=ens3
$ cat <<EOF > ~/.conkyrc
conky.config = {
use_spacer = 'left',
pad_percents = 3,
background = true,
double_buffer = true,
font = 'DejaVu Sans Mono:size=10',
use_xft = true,
alignment = 'top_right',
gap_x = 10,
gap_y = 40,
own_window_argb_visual = true,
own_window_argb_value = 100,
own_window_type = 'dock',
own_window = true,
update_interval = 5.0,
}
conky.text = [[
\${color orange}Hostname: \${color}\${nodename}
\${color orange}Kernel: \${color}\${sysname} \${kernel} on \${machine}
\${color orange}Uptime: \${color}\${uptime}
\${hr}
\${color orange}CPU:\${color} \${freq_g} GHz
\${color orange}1:\${color} \${cpu cpu1}% \${cpubar cpu1}
\${cpugraph}
\${color orange}Name PID CPU% MEM%
\${color lightgrey} \${top name 1} \${top pid 1} \${top cpu 1} \${top mem 1}
\${color lightgrey} \${top name 2} \${top pid 2} \${top cpu 2} \${top mem 2}
\${color lightgrey} \${top name 3} \${top pid 3} \${top cpu 3} \${top mem 3}
\${color lightgrey} \${top name 4} \${top pid 4} \${top cpu 4} \${top mem 4}
\${color orange}Load average: \${color}\${loadavg}
\${color orange}Processes: \${color}\${processes} \\
\${color orange}Running:\${color} \${running_processes}
\${hr}
\${color orange}RAM: \${color}\${mem}/\${memmax}
\${memperc}% \${membar 4}
\${color orange}Swap: \${color}\${swap}/\${swapmax}
\${swapperc}% \${swapbar 4}
\${memgraph}
\${hr}
\${color orange}/ \${color}\${fs_used /}/\${fs_size /} \${fs_bar 6 /}
\${hr}
\${color orange}IP: \${color}\${addr ${NETWORK_INTERFACE}}
\${color orange}Up: \${color}\${upspeed ${NETWORK_INTERFACE}}
\${color orange}Down: \${color}\${downspeed ${NETWORK_INTERFACE}}
]]
EOF
2.2 Always background .conkyrc
$ export NETWORK_INTERFACE=ens3
$ cat <<EOF > ~/.conkyrc
conky.config = {
use_spacer = 'left',
pad_percents = 3,
background = false,
double_buffer = true,
font = 'DejaVu Sans Mono:size=10',
use_xft = true,
alignment = 'top_right',
gap_x = 10,
gap_y = 40,
own_window_argb_visual = true,
own_window_argb_value = 0,
own_window_type = 'normal',
own_window_hints = 'undecorated,below,skip_taskbar,skip_pager,sticky',
own_window = true,
update_interval = 5.0,
}
conky.text = [[
\${color orange}Hostname: \${color}\${nodename}
\${color orange}Kernel: \${color}\${sysname} \${kernel} on \${machine}
\${color orange}Uptime: \${color}\${uptime}
\${hr}
\${color orange}CPU:\${color} \${freq_g} GHz
\${color orange}1:\${color} \${cpu cpu1}% \${cpubar cpu1}
\${cpugraph}
\${color orange}Name PID CPU% MEM%
\${color lightgrey} \${top name 1} \${top pid 1} \${top cpu 1} \${top mem 1}
\${color lightgrey} \${top name 2} \${top pid 2} \${top cpu 2} \${top mem 2}
\${color lightgrey} \${top name 3} \${top pid 3} \${top cpu 3} \${top mem 3}
\${color lightgrey} \${top name 4} \${top pid 4} \${top cpu 4} \${top mem 4}
\${color orange}Load average: \${color}\${loadavg}
\${color orange}Processes: \${color}\${processes} \\
\${color orange}Running:\${color} \${running_processes}
\${hr}
\${color orange}RAM: \${color}\${mem}/\${memmax}
\${memperc}% \${membar 4}
\${color orange}Swap: \${color}\${swap}/\${swapmax}
\${swapperc}% \${swapbar 4}
\${memgraph}
\${hr}
\${color orange}/ \${color}\${fs_used /}/\${fs_size /} \${fs_bar 6 /}
\${hr}
\${color orange}IP: \${color}\${addr ${NETWORK_INTERFACE}}
\${color orange}Up: \${color}\${upspeed ${NETWORK_INTERFACE}}
\${color orange}Down: \${color}\${downspeed ${NETWORK_INTERFACE}}
]]
EOF
3 Autostart
Make conky to be start automatically on login. You can use gnome-display-properties instead of the following command.
$ mkdir -p ~/.config/autostart $ cat <<EOF > ~/.config/autostart/conky.desktop [Desktop Entry] Type=Application Exec=/usr/bin/conky Hidden=false NoDisplay=false X-GNOME-Autostart-enabled=true Name=conky Comment= EOF
Reboot machine.
$ sudo reboot
4 Execution result
The conky widget is displayed on desktop.
